Cable Duct for Flexispot

This is a simple Cable Duct for Flexispot Desks, it will definitely fit on the EW8 and Q3. If you think it will fit on your desk, there is a FitTest file, with which you can easily test the fit. 

You will need TPU to print the DuctCover and a hard polymer like PLA or ABS for the Duct. There are two versions with cutouts on either side to avoid interference with the bolts that hold the table top. After you've printed the ducts you want and 2 covers for each duct, you can slide the cover into the grove on the duct and clip it onto the desk.

Printing:

DuctCover: TPU, settings don't really matter, NO BRIM

Duct: PLA/ABS, settings don't really matter, BRIM

If this model helped you, please take the time to post a make and/or like, thanks!