Fujitsu 3.5 caddy and 2.5 adapter with lock for Primergy TX1310 M5 and Celsius W520 series

Nozzle: 0.4mm

Layer height: 0.2mm

Material: PETG

Supports only needed for 2.5 drives.

Screws: 4pcs 6-32x6mm countresunk screw for 3.5" drives. 4pcs M3*5mm countersunk screws for 2.5" drives.

You can print in place. After the successful print, you need to be broken carefully by moving it back and forth firmly to broke the support inside the hinges.

I have a Celsius W520 and a Primergy TX1310 M5. The adapters are good for both models. I think it can be compatible with other models.