.223 Remington, Pocket Recessed Spring and Snap Latch Modular Ammo Box

This version has these improved features:

• ramped latch catch with a groove to retain snap latches
• text for multicolor
• ramped latch fixture for easier assembly
• both Spring Latch and Snap Latch - choose your preference
• The alignment tabs on the tops have a relief cut to improve clearance
• the Alt box bottoms have high sides and a minimum height box top

Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options.

Other ammo boxes of this type can be found in my Pocket Spring Latch Ammo Boxes Collection https://www.printables.com/@brass_ring/collections/2345627 .

This cartridge box is printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together.

The box halves can be printed with moderate infill (10%-20%) or 0% infill with 5 top layers and 5 bottom layers.  The box halves can be printed with no supports, but I prefer to paint on supports under the flat sections on the latch hoops and the latch catches. I printed with 0.20 layer height in PLA.

Assembly instructions:  See the attached PDFs

Category: Tool Holders & Boxes