Printable case for the Hoermann Garage Remote:
The buttons were printed with resin, but they should work just fine when printed with a FDM printer.
The case is designed with 2 M2 heat-set-inserts and short M2 screws( ca. 7-9 mm). That way you can easily and reliably change the batteries.
Up top is a loop in order to attach it to your key chain.
If you plan on threading it directly into a keyring, the inner diameter should be about 10 mm.
An example keyring is in the files.
You will need every part once and the button twice.
The author marked this model as their own original creation.