Crazy Twisted Dice Tower V6.2 Dual Path (0% support required)

Fits 12mm or 16mm dice like a charm :)

Some refinements based on previous design. Made closed paths so the dice cant escape, also extended tower size slightly :))

2-3 hour print, over 90% improvement on previous towers in terms of time.

0% support, but manual assembly is required. Printed as 1 base and multiple sets if stairs. (4x 4 stair and 12x 3 stair, can print each in individual colors if needed)

Be careful during assembly not to bend anything. However once assembled its really sturdy.

If i made a positive impact in your life please support me via paypal :D
https://paypal.me/drewbrewchan?locale.x=en\_US

Thanks for stopping by, come back soon ;)