Crazy3D TicTacToe with travel case

Here you have a travel game, the Crazy 3D Tic Tac Toe.

It is made for easy printing and you need no additional parts for it.

Just print everything like it is saved in the file and have fun.

Print the figures two times in different colors.

You have everywhere a 1.2mm wall thickness.

To store everything together, put the smaller ones into the biggest ones and place it on the base pins (not the centered one). Then snap the cover over the base.

To play, just use some small force on the base from the top (through the cutout of the cover) that the base comes out.

How to play:

Classic:

Use only the smallest figures to play it on the base. The first one who get three in a row (horizontally, vertically or diagonally) wins.

3D:

You can start with the figure size you want, you need not to start with the smallest ones. Take care, the bigger ones can take over the position of the smaller ones!

For most fun and long lasting games, start with the smallest, then use the middle sized and then the biggest ones :-)

Would be happy to see your makes!