Prusa MINI+ base using DIN rails

In addition to the printed parts, building this base requires 2 250 by 35 by 7.5 mm top hat DIN rails (such as the RND 465-00764, for instance), 4 M5 drop-in T-nuts for 3030 aluminum extrusions, 4 M5 25 mm button head screws (ISO 7380) and, for each foot, 1 M5 hex flange nut (DIN 6923), 1 M5 10 mm button head screw (ISO 7380) and 2 Prusa anti-slip pads. All printed parts have notches to place the seams, so that they do not end up in bad places. After this base is installed, the printer will be 25 mm taller.