Spirit Island Accurate Blight Token (snappy)

This is nearly identical to the original blight token model by Daniel Cox, but the parts snap together and print slightly better (thicker features). Hopefully this will prevent them from falling apart when the PLA of the bottom part inevitably lengthens under the tension from the inserted top part.

Assembly is the same as the original model (see photo). Insert the standing part into the base from below, then use some tools or your fingers to press the base down until it snaps into place.

Printed in black glitter PLA from RecyclingFabrik (Funkelnde Nacht).

• Added small indents to the top part and small protrusions in the slot of the bottom part, so that they snap together better.
• Made the slot narrower.
• Made the features in the top part slightly ticker so that they print better.