RMRRF 2025 Plaque, Pendant, & Earrings Multi Color

RMRRF 2025 Plaques, Pendant, & Earrings Multi Color

Turns out I can't combine the STL's they “merge” and can't be separated again. so I had to save each “piece” as a separate STL the folder name is the width one Zip File 200mm 300mm 400mm 500mm and if your one of those sick people with an orange giga 800mm (would LOVE to have one of these at 800mm!!!)

Just make sure when you slice you DISABLE the end scrip command to turn off the heated bed if your doing separate STL's otherwise the part may cool and self release from the bed! use Z HOP to avoid collisions (most parts are only 0.4mm thick so 2 layers at 0.2mm)

Drop in the 8 or 9 files and “align origins” then GROUP the files and center/arrange.

Assign each a color or save/print separate STL files.

The show creators want creative control over commercial usage of the event logo so please respect the license and don't use it commercially without their permission.