Coat Rack (Wall Mount)

Wall mounted coat rack. I made it for my kids but can be used other places. Mounted using drywall anchors or screws. 

Hardware needed

Each Hook needs

• Qty 2 - M4 Hex Nut (Embedded in the model)
• Qty 2 - M4x8 Cap Screw (10 would work too)

The base plates have 4 holes for anchors but you don't need to use screws at both locations unless you are hanging a ton of weight off of this. But I would recommend putting at least two screws in each base plate, the joining pieces aren't made to take load just help connect.