Remix of Plastic Bag Drying rack with metal centre shaft - Larger Holes

Took the fantastic model from @GraemeH_223680 and expanded the holes to fit some rods I found on Amazon.

Hardware: 

• https://www.amazon.com/dp/B0BL88RC2D

Printing Instructions:

• Same as original, I needed pretty wide brim on a PEI sheet (I used 10mm)

I made the holes slightly bigger on both the top/bottom part and the arms. The arms might be a little too tight, I had to force them down the rod, but they move just enough and I don't have to worry about accidentally changing their orientation.