Bait Jar for Crab / Shrimp / Crawdad traps

UPDATE: The .stl file now has the slot in the tab!

This is a very slight remix of the Dessicant container by @biketiger. Scaled to 150%, and added a tab with slot to easily zip-tie to the inside of your crab pot or trap, or shrimp, etc. The .stl file does not have the negative part which creates the slot for the zip-tie, so you will have to add that in your slicer (see photo). The 3mf file and g-code file has the slots. I printed with 2 perimeters, .2 layer, and 10% grid infill. I'm sure all of those can be modified to suit. Please let me know if you have any questions or comments, and post some pics of your make! Thank you.

I simply scaled it up to 150% and added a tab with slot to easily zip-tie to the crab pot.