ImpulseRc APEX MICRO - DJI O4 camera mount

This camera mount, printed in two parts holds the DJI 04 pro air unit camera in place. The 04 camera is too wide which causes it not too fit between the two standoffs on the front of the frame. These brackets, printed in TPU hold the camera in place while replacing the standoffs. 

Due to the small tolerances, a threaded insert (M2,5) is inserted in these TPU parts to be able to screw the bracket in from the bottom at least. The top part sadly does not have enough tolerance/space to put in a screw. This compromises the strength of the frame but enables the mounting of the O4 pro camera in this tiny and compact Frame. 

Materials:

• TPU material
• M2,5 threaded insert