HP Dock Cover

I had limited space on my desk and wanted to use the internal screen on my work laptop (Which connects to a HP dock) and when I placed the computer straight on to the hp dock it overheated so I made this so that the computer is a little bit higher than the dock allowing some airflow. 

If you don't know how to set it up ill explain how to do in Prusa Slicer (or you can use the project or gcode files):

1: Open the “Dockcover.stl”

2: Right click on it an choose “Add Modifier” then “Load …”

3: Choose the “dockinfil.stl”

4: In the menu on the right you need to right click on the infil and choose “Layers and Perimeters” and set the top and bottom to 0.

5: Right click the infil again and choose “Infill” then you can choose the type of infil and the % you want, I used Honeycomb and 15% because I wanted the air to flow easily.