Fridge Door Handle

I own a fridge that I bought used and the freezer door did not come with a handle so I designed a simple one to use attach onto the door with double sided tape. The tape is very strong and the handle works much better than i was expecting. it should stick out about as far as a normal fridge/freezer door handle does

I printed it out of Prusament Galaxy Black PLA any filament should work fine but maybe use gyroid infill at 20 or 25% you will have to print it diagonally on most printers however. using fuzzy skin may also produce a nice affect but i have not tried this.

this is the tape i used: https://www.amazon.com/9-85ft%EF%BC%8CHeavy-Removable-Mounting-Picture-Adhesive/dp/B0CYQ11KCF/ref=sr_1_1_sspa?crid=286WQRWD97XDK&dib=eyJ2IjoiMSJ9.VGZIXsIneUCSFRjYY1ceE6_rCTIyIEQfe5vEQswPfL01k1ZKxzW721cgaVqQNsT6-3hiS9mKDGCw-PzCUaYAg14MBHlsUvQ2b_iP2FlhH4NNg3AvGDobcYXixhsTRWXyEdzP2YkoEdR1iPR1U2b-R3o7JAbFPwLPvCiD8FQnU0el09AKpu_fi06ldnS4nT-hAgSR2tdtdOq8DIWeLrL_-5TcyPg-QiPpK4mL-MqDyQA.IYnaPlYKXDS8i7idAplyxHFIFtVrvDxB3FETB82KFZ0&dib_tag=se&keywords=command%2Bstrips&qid=1745291796&sprefix=command%2Bstrip%2Caps%2C262&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1