**You can purchase this case and others already printed:**
US customers can purchase from QuantumShadow3D:
(https://www.etsy.com/shop/QuantumShadow3D)
UK/EU customers can purchase from 3DChicken:
(https://www.3dchicken.co.uk)
These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.
Anyone interested in licensing this design for non-commercial (i.e. private) sale can message me here to discuss. Please respect the Creative Commons license restrictions I have chosen (http://creativecommons.org/licenses/by-nc-nd/4.0/) and I encourage anyone who sees my designs for sale contact me.
With all that said, now on to the models…
Update 31-December-2023:
- Added button-tighter-fit model in case the original button is too small for the holes
- Uploaded v7 frame models to correct many little things that were bothering me, including the ribbed sides' rough look. It's now clean and consistent.
- Uploaded v7 frame variants without the dust cover screw hole, for use with cases without the need for dust covers (or people who can't/don't want to print TPU)
- Uploaded v7 18650/21700 back covers to correct small defects and match the ribbed sides of the v7 frames (NOTE: v6a and v7 frames and backs will NOT match)
- Uploaded v7 slim back covers to correct small defects and match the ribbed sides of the v7 frames (NOTE: v6a and v7 frames and backs will NOT match)
This is a case for the TTGO T-Beam v1.x NEO-M8N and NEO-6M boards, designed for the Meshtastic project (https://meshtastic.org).
There are only FOUR files required for a complete case, as well as socket head cap screws and nuts; refer to the parts list below.
Required hardware:
-Four (4) M3x16mm socket head cap screws and four (4) M3 nuts for the case
-Four (4) M2x4mm screws (no nuts) to secure T-Beam to the frame
Minimum required model files for the T-Beam NEO-6M (SMA antenna jack):
- T-Beam_v7_frame_6M
- T-Beam_v6_front-6M-xxx - Various case patterns to choose from
- T-Beam_v7_back_18650 (or 21700), depending on the battery size used
- T-Beam_v6_button-short - Can use -tall if bigger buttons are desired
Minimum required model files for the T-Beam NEO-M8N (u.FL antenna jack):
- T-Beam_v7_frame_M8N
- T-Beam_v6_front-M8N-xxx - Various case patterns to choose from
- T-Beam_v7_back-18650 (or 21700), depending on the battery size used
- T-Beam_v6_button-short - Can use -tall if bigger buttons are desired
Optional:
- T-Beam_front-xxx-25mm - For use with 25mm GPS antennas
- T-Beam_dust-cover - Print in TPU, covers USB port and buttons (recommended!)
- T-Beam_SMA-gasket-for-wide-base-antenna - Print in TPU, for use with larger base antennas (for NEO-6M only)
- T-Beam_SMA-gasket-for-stock-antenna - Print in TPU, to use with stock antenna (for NEO-6M only)
- T-Beam_screen-insert - For use with acrylic laser-cut window insert
- T-Beam_screen-acrylic-template - Template for cutting acrylic windows (1.5mm thick)
- T-Beam_v7_back_21700 - If you want to use a 21700 battery and holder
- T-Beam_v7_slim-xxxx - If you want to use a flat lithium polymer battery (703090 battery size code); NOTE: requires desoldering and removal of the 18650 battery holder
Misc:
- There are multiple versions of the front-xxx model, including a noscreen version and a blank_no-screen version to add your own branding, design, labels, etc.