Sometimes you need some place. this can be gained if both powersupplies are mounted on top of each other. This helped in my voron 2.4 build where i run 48V and 24V for example.
The bracked is mounted first to the 4 mounting holes of the Meanwell LRS-150-48 supply.
Then you can click it into the mesh of the LRS-200-24 and bolt the latches with 2 m4 scews onto the side of it. This way it is secured in hanging and laying configuration.
The standoffs allow for some airflow between the powersupplies.
Other powersupplies might also work if they have the same hole pattern and mesh.
PRINTING:
Use a material that's at least a bit flexible (or at least not too brittle). You need this for the clips to not break of. 3 Perimeters, 5 bottom, 5 top layers.
The author hasn't provided the model origin yet.