RoboForce Rocket Booster Base with Collapsible Flames

This is an optional bottom half that can be used for the RoboForce figures I've been re-designing and printing at ⅔ scale of the original toys. It includes printable cylinders that can be used for a rocket flame effect when lifted up.

The parts are oriented for best printing. The Booster Top is the only one that can benefit from supports to make sure there's proper space for the stacked rings to nest inside. The other parts, including the stacked rings, can be printed without brim or support. You can separate the Stacked Rings into individual columns to print in different colors using your favorite slicer software. 

Assembly:

The Stacked Rings should be placed inside the Booster Bottom, with the slightly smaller ends facing the bottom. Then the Booster Top will fit onto the top with space for the rings to move easily when lifted. The Top and Bottom will need to be glued together. 

RoboForce Figures (so far):

• SOTA
• Hun-Dred
• Coptor
• Enemy
• Wrecker
• Vulgar
• Maxx 25
• Cruel

Bases:

• Tank Base
• Rocket Base
• Magnet Base
• Spider Base