Simple Hinge - Print in Place

Here is a hinge I made for no reason other than the fact that people like hinges. It prints in place.

191

628

updated January 31, 2022

Description

Print at full scale at 0.3mm layer height or scale the print smaller and use the standard 0.2mm layer height.

I don't know how strong this is, but I can't break the hinge portion apart using just my hands. Best printed in PLA but PETG and PVB will work fine.

Made to be used with wood screws with an 8mm diameter head.

The author marked this model as their own original creation.