180mm fan to rectangular vent shroud

rectangular fan shroud, powered by 180mm fan. attaches to 6" flexible tubing

shroud dimensions are 280mm x 115mm

Print Settings

Printer Brand:

LulzBot

Printer:

TAZ 6

No

Supports:

No

200

Infill:

20

Notes:

i printed this with 3 perimeters in an enclosed chamber but got pretty bad layer separation, and just used duct tape to hold the layers together. i'd recommend to try a lower infill or less perimeters for best results. I would have made it wider but max bed size on Taz6 is 280mm.

printed with simplify3d.