RAM fan holder for 2x60mm fans

A RAM fan holder with space for two 60mm fans for motherboards with 4 DDR4/5 slots.

Tested for fit on an Asrock X870E Taichi and a KIT of two Kingston low profile RAM.
If your RAM is taller than the one in the image (39.2 mm), adjust Z height to your needs.
I printed mine in ABS, but PLA should work too if the fans are always spinning.

Fans used: Noctua NF-A6x25 @ 80% rpm
 

15 minutes AIDA64 memory stress test: ~26-33 degrees Celsius increase without fans.

15 minutes AIDA64 memory stress test: only ~8.5 degress Celsius increase with fans.