rpi4/5 POE toll
I needed a case form my RPI4 with a large POE (bought on amazon), I found a normal case and I modified it.
0
6
0
29
updated
April 19, 2025
Description
PDFit is just a large case with snaps where you can add a notua fan 40x40x10 but even x20, i have exaggerated in the height but i prefer to have moer space than less.
it is snug snap, better to print it in petg, if you use PLA is fine, but you will need some force to close it.
not much space to get the SD from the back, which should be improved.
the POE it is the cheapest you can find on Amazon and I can tell you works great, even with a DVB-T decoder attached at usb… the goal was to create a tvheadend server…
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
I found it on internet, i wanted f3d file and this is the only one I found…
the link is for the youtube of the author.
if it is not please let me know I will change the link.
