Bicycle Front Rack Light Mount - Nitto SimWorks Obento

This is a front light mount for a bicycle equipped with a Nitto Lamp Holder, used on the SimWorks Obento front rack. It's similar in mounting to a Paul Gino and other light mounts, however it's intended to use a stem cap to mount it with. This has been designed for the diameter of a Chris King 1-1/8" top cap.

This light mount is specific to the Nitto Lamp Holder as it's shaped to the bracket to keep the mount from rotating. This also helps you not have to overtighten the fastener. 

Other parts needed:

1-1/8 top cap

M6x35mm cap head screw

M6 flat washer

M6 nylon locknut

I've been using it in PETG with a 0.4mm nozzle, 0.3mm layer height, 3 perimeters and 25% grid infill and it works great. Thanks!