I looked at some of the profile covers on offer and realised that although there are some good ones, some of them are difficult to fit and difficult to remove.
That's why I made this one out of TPU.
You should already have installed the new bearing clips.
I am sure that the covers will fit, as I was able to test this.
If you still have the old u-bolts fitted and want to test this, please let me know if the covers fit.
Length: 195.00 mm (front profiles) / 117.00 mm (rear profiles)
Width: 14.00 mm
Height: 7.38 mm
Material: TPU
Resolution 0.2 mm layer height
Support: not required
Happy printing!
If you like the model, please leave a Like and post a Make. Thanks in advance.
I am always open to suggestions for improvements or changes.
_____________________________________
Ich habe mir einige angebotene Profilabdeckungen angesehen und gemerkt das es zwar einige gute gibt, diese jedoch teils schwer anzubringen sind und sich schlecht wieder entfernen lassen.
Daher habe ich mir diese hier aus TPU gemacht.
Ihr solltet bei euch schon die neuen Lagerklammern (Bearing Clips) verbaut haben.
Bei diesen bin ich mir sicher, das die Abdeckungen passen, da ich das testen konnte.
Solltet ihr noch die alten U-Schrauben (U-bolts) verbaut haben und das testen wollen, gebt mir bitte Bescheid ob die Abdeckungen passen.
Länge: 195.00 mm (Profile vorne) / 117.00 mm (Profile hinten)
Breite: 14.00 mm
Höhe: 7.38 mm
Material: TPU
Auflösung 0,2 mm Schichthöhe
Support: wird nicht benötigt
Frohes Drucken!
Wenn euch das Modell gefällt lasst bitte ein Like da und postet ein Make. Danke dafür im Voraus.
Für Verbesserungs- oder Änderungsvorschläge bin ich immer offen.
The author marked this model as their own original creation.