Can Caddy for up to 13 cans

These are two versions of a can dispenser (or caddy) for holding up to 13 cans of your preferred cold beverage. One version is for standard 12 oz cans and the other is for 16 oz cans. Each half model should be printed with the faces that join the two halves together facing upward (Z+). I have successfully printed these with supports.

I glue the two halves together with quick-drying PVC cement. Cans may be loaded from the top opening at the front of the caddy by pushing any cans on the top row toward the back of the caddy.

The overall size of the assembled caddies (cans included) are:

12 oz can caddy: 257.7mm (10.15 inches) tall, 142.5mm (5.61 inches) wide and 330.2mm (13 inches) deep.

16 oz can caddy: 257.7mm (10.15 inches) tall, 177.5mm (6.99 inches) wide and 330.2mm (13 inches) deep.

Filament required for each caddy half:

12 oz can caddy: left half - 400g. Right half - 380g.

16 oz can caddy: left half - 437g. Right half - 420g.

UPDATED
For those with printers too small to print this in halves, I have posted a 4-part assembly as a zip file.

By request, I have created another caddy for cans that are 53mm in diameter and 135mm long. The files for the halves are 53D x 135L can dispenser (left half).stl and 53D x 135L can dispenser (right half).stl. The "53D x 135L" shows the files are for 53mm in diameter (53D) and 135mm in length (135L). If I add more varieties, I will use the same nomenclature so that you can easily determine what files are for what sizes.

I am getting too many requests to modify the design, so here is the original CAD file in Onshape, so you can make modifications for your own use: https://cad.onshape.com/documents/bc51f7b91358e2d1502e41e0/w/f8f20130efa53c667c5b5efe/e/2e57c2f111a5a6f8f4e47a50
Just click on the link and you'll be able to create a copy in Onshape for yourself. You do NOT install Onshape on your computer. It's web-based.