Soup Can Lid with Slot

Fits over a Campbell's soup can I use to recycle spent razor blades. Could be used for coin collection too. The can measured just under 80mm in diameter at the lip, so this is a perfectly snug fit.

Print instructions

Category: Containers Print Settings

Printer Brand: Anet

Printer: A8

Supports: Doesn't Matter

Resolution: .2mm

Infill: 10

Filament: Shaxon PLA Red
Notes:

Default orientation in the file puts the top of the lid against the bed. This was fine for me, but if you want to print it flipped over, it'll probably need supports.