Model Y Juniper Vent Cover

The Model Y Juniper adjusted the vent cover slightly from the previous (2021-2025) gen Model Ys.  With this, I modified a previous version to fit the newer version. 
Key Notes:
1) The Sides slot around the plastic of the vent.  But with Teslas build consistency, the vent may not be uniform depth.  Please consider if you want to print the extended "ext depth” or the standard “std depth” side parts (you may need to print 1 of each).
2) The Cover_Ext is close to the max width for my vents.  If these vents get smaller, it may be hard to mount.  Please consider if you want to print the extended "ext depth” or the standard “std depth” side parts.  I believe Std should work well.

I had to extend the depth of the side mount holes and make them straight instead of curved. (my juniper has asymmetric depth so I also had to bend the plastic for the part to fit on 1 of the two sides).  I also reduced the width of the vent cover itself.  I decided to symmetrize the cover due to the reduction in size with a cross bar in the middle.