IGOR - encoder spacer
Fits snugly between the microcontroller and the rotary encoder, helps secure the encoder during button presses.
0
8
0
32
updated
April 19, 2025
Description
PDF- To prevent button presses from dislodging the encoder, and avoid gluing.
- The blocky bottom fits between the 2 rows of pinouts of the microcontroller
- The smaller round top can push upwards onto the bottom of the rotary encoder PCB
I used a 1mm nozzle, 10% infill, 1 wall, 1 top layer, 1 bottom layer, which seem to already be strong enough
Model origin
The author remixed this model.
Differences of the remix compared to the original
An additional spacer part