Mediumshot - Waterblaster Conversion Kit

These parts are designed to work in conjunction with select Nerf blaster parts to turn a cheap water blaster into a functioning, half-length dart shooting, Nerf blaster.

The Nerf parts required to complete this mod are as follows:
Nerf Longshot Boltsled & Metal Pin (Boltsled must be trimmed at the bottom to work)
Nerf Longshot Plunger Tube
Nerf Longshot Plunger Rod
Nerf Longshot Catch Plate
Nerf Longshot Catch Spring
Nerf Internal Barrel (available in many blasters)
Nerf Raider Breech Acceptor

A few of the parts have been designed with 4-40 screws in mind, and some have been designed for discarded Nerf size screws.
In addition, 1 extension spring is needed for the Magazine/Clip Release, and an upgraded torsion spring is recommended for the Raider breech acceptor.

Currently, the mag will is designed to accept both Katana and Talon mags, but the mag release currently is only set up to work with Katana mags. As soon as I get some Talon mags, I will update the design to be fully compatible with them.

Here are pictures and a short write-up on the blaster:https://www.reddit.com/r/Nerf/comments/g7h4l3/mediumshot\_20\_water\_blaster\_longshot\_conversion/

The mag well was designed in part by using some of the dimensions from Philip Sweeting's Katana Mag adapter and MeakerVI's "Wild card" V2 Katana/Talon Mag Adapter. My huge thanks to both of them.

Print Settings

Printer Brand:

MakerBot

Printer:

MakerBot Replicator 2

**Rafts:** Yes

Supports:

Yes

**Resolution:** 0.2 mm

Infill:

20%

**Filament:** [ Makerbot PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Makerbot+PLA&tag=thingiverse09-20) Red Assembly Pictures =================

Left Side Assembled

Exploded View

Right Side Assembled

Mag Well Assembly

Bolt Sled Assembly

Breech Assembly

Category: Mechanical Toys