Maverick Slide Replacement with N-Strike Stock Attachment Point

This is a Slide Replacement and Stock Attachment Point for the Nerf Maverick. It uses the 3 small screws as well as the N-Strike Attachment nub and spring from the stock slide of the Nerf Maverick. It features a N-Strike compatible rail and stock attachment point.

THESE PARTS CANNOT BE USED ON A STOCK NERF MAVERICK. They lack the required geometry inside for them to be able to hold the metal bar that is used to prime the blaster in its stock form, and the parts do not slide once they are installed on the blaster. They are, however, compatible with my Mayfly Maverick Flywheel Conversion kit that is linked below.

Thingiverse links for all the parts used in this build: 

Mayfly Kit: https://www.prusaprinters.org/prints/126863-nerf-maverick-mayfly-flywheel-conversion-kit 

Maverick N-Strike Barrel Attachment Muzzle: https://www.prusaprinters.org/prints/126862-nerf-maverick-n-strike-barrel-attachment-muzzle 

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

Yes

Supports: 

Yes

Resolution:

Any

Infill: 

20

Filament:
Filacube PLA Silver 
 

Notes: 

I would recommend printing both parts vertically, with the back of the N-Strike Stock Attachment Point positioned on the bed of the printer.

Category: Replacement Parts