This is a stand I designed to hold the "ESR HaloLock Kickstand" Magsafe wireless charger.
I included a hollow cavity inside, which I loaded up with steel BB's to add some weight to it, so that it wouldn't lift up with my phone (the magnet is crazy strong on this charger).The wire channel is designed to work with the charging cable that came with the device, so if you use a different wire, the tabs on the underside might not hold it in place.
The back is hollowed out behind the charger for venting heat, and I also included two holes near the top where M3 SL-type Double Knurled threaded inserts could be installed (I got mine from Aliexpress).
I printed it at 0.20mm with a 0.40mm nozzle. Needs to be 0.20mm due to the thin wall channel for the USB plug to pass through the base up to the charger.
The author hasn't provided the model origin yet.