b3n3d1k7

@b3n3d1k7

Fits and works perfectly!
Thank you very much for the model! (edited)

6

Christoph

@Christoph_79778

Great model, fits perfectly! Printed In Prusament PC-CF Blend for heat stability reasons.

L 13

LuukvdBeemt

@luukluuk12_609339

Perfect fit! It’s quite big so be aware of that, but it fits nicely in my scale so I’m happy

6

man1ac

@man1ac_1081683

Has anyone tested this for a Bezzera Magica?Seems like it could fit?

@ChristianG_591391 you choose a really cool filament color. Like it.

5

Christian G

@ChristianG_591391

@Joe_17122 It was only supposed to be a proof of concept :-). But the model is great and works. (edited)

does not fit

@venca did you print it as scale of 100%? The size is big, but you need this, because the force to stamp is or could be big.
Send me the information where it doesn’t fit. I can try to fix it.

6

Tadeáš Springler

@TadeasSpringl_540462

nesedí na můj model

14

roamingthings

@roamingthings

This is really huge but looks very nice. I printed it using Fillamentum ASA and forgot to scale it up a bit. Turned out very tight and I had to remove some plastic.

15

Joe

@Joe_17122

@roamingthings being open, if I design and print for it the first time, I was also scared how big it was. But with a friend we calculated the force and it was also quite higher than expected.

As aspected :)

Beautiful 👌🏻

Prints and fits like it was meant to be here 🤓

I got some Filament-Blobs at the top but that was due to a power-outage because i could not wait and printed during a massive Thunderstorm. About 2 hours before the end of the print-job Power went out and the Nozzle stayed heated directly above the material for some minutes until i could save the print. Luckily i managed to continue and finish it.

I did not want to throw it away so I cleaned the bad issues after the print finished and decided to keep it near my Rocket.

Love it and had no problems in any way with this item!

Thanks for making this available and kind regards.

Edit:
Printed in Prusament PETG - Prusa Galaxy Black. (edited)

15

Joe

@Joe_17122

@MrBlaschke_296082 yes, for sharing this nice pictures. Many thanks for your additional comments. This will help other users.
Dankeschön

27

Jerrod H

@JerrodH

Handsome design; printed well.

Prusa Mini+ with 0.15mm quality preset, 4 perimeters, and 25% gyroid infill. Prusament Mystic Brown PLA.

I will say make sure you like the size and look of this before investing the filament and time in it — it is quite large, and unnecessarily so, with most of the bulk not contributing to the strength of the part. That is, all of the weight of the tamping force is borne on the group/head tabs, and so the loads are concentrated only directly underneath them. I chose to “beef up” the whole part, but that was not time well-spent. I could probably use this as a jack stand to bear the weight of my car.