Voron 2.4 Plug Panel for a Schurter DD12

This a remade model of the original Voron 2.4 plug panel. 
 

Includes holes for a Schurter DD12.XXXX.XXX ; Ethernet Keystone

Ethernet keystone installation is easy. Schurter takes a bit of a push to get in all the way.

BOM :

2x M2*10 self-tapping screw (to install Schurter)

2x M3*8 Socket Head Cap Screw (to install on to the frame)

Printing settings :

Material : ABS

Layer Height : 0.2mm

Nozzle : 0.4mm

Infill : 15-25%

Brim reccommended

Print Time : ~4-5 hours