Drone Hook

Turn your stack of miniquads into art!

This hook attaches to the wall using Large 3M Command Mounting Strips. Be sure to follow the directions and wait 1hr before hanging the quad on the hook.

The clip may look thin, but it's plenty to hold a miniquad. The flexibility of the material (ABS) allows one to slide a slightly taller drone-arm in and out easily.

The original Fusion360 model is here: http://a360.co/2xGc0LO

Print instructions

Category: Hobby Print Settings

Printer: i3 clone

Rafts: No

Supports: No

Resolution: .2mm layers, .4mm nozzle

Infill: 65%

Notes:

I used ABS. print the hook vertically, as shown in the timelapse: https://youtu.be/jdVDLPDweJA

If you find this model useful, consider buying me a ko-fi: https://ko-fi.com/natester