Gridfinity Bin Labels Multicolor Blank

This model is based on the fantastic Gridfinity Bin with Printable Label by Pred.  This has quickly become my go-to bin for organizing my hardware.  

This blank label is useful if you want to use your slicer's Text tools to add your own text in the slicer.

The labels provided by Pred in the original model are a single object.  You can print them in two colors easily enough by adding a pause in the G-Code and changing filament.  But you have a fancy multi-material printer, and you want to print in multicolor without manual filament swaps!  You can still insert a pause and a filament swap, or you can use the slicers Painting tools to apply colors to the frame and text/shapes, but this is a bit of a hassle.  Easier is to split the design into separate objects, then right-click the objects in the Object list and set the filament from the list of available filaments.

This model is the same as Pred's original label design, with the objects named (as best I can) so you can easily set the filament color for each.

Some notes to assist you:  

• Prusa/Bamboo/Orca slicer usually (but not always!) seems to apply Filament 1 to the Frame object, and Filament 2 to the Plate object.  If you put your filaments in the right order, you might not have to change anything.
• When importing into Prusa/Bamboo/Orca slicer, you will be prompted whether to import as a single model containing multiple parts.  Respond Yes to this prompt.
   

Exported as 3MF with separate objects for easier multicolor printing