CR-10 Mini Bed Model

This is a accurate model of the Creality CR-10 Mini bed to be used for manufacturing a replacement heated bed. 

I made this so I can use a Silicone Heater. This makes ABS possible on the CR-10 Mini.

Silicone Heater: (Silicone Heater 235x305mm for Creality CR10 MINI 3D Printer HeatedBed (120V) from KEENOVO) https://www.amazon.com/dp/B07BHPC1SB?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Relay: (D1225 from Sensata-Crydom) https://www.digikey.com/en/products/detail/sensata-crydom/D1225/139465

Thermal Fuse: (USW-114T from US Electronics Inc.) https://www.digikey.com/en/products/detail/us-electronics-inc/USW-114T/14123773

Screws needed for this bed are M5 Machine Screws with a flat head. 

I recommend PCBWay.com for machining this part but you can use whatever manufacturer you want.

Material used: Aluminum 6061

Price (2024): $88.90 (Aluminum Heated Bed) + $67.50 (Silicone Heater)+ $84.13 (Relay and 5x Thermal Fuse) = $240.53 Total Cost USD