This Lighthouse is based on the https://www.thingiverse.com/thing:2687021 model and inspired on a real and beautiful lighthouse in Nova Scotia, Canada.
I remixed the original model by splitting in several parts so it can be printed in different colors.
Note that this model color height does not honor original lighthouse. For reference please see: https://upload.wikimedia.org/wikipedia/commons/2/2c/Brier_Island_Lighthouse_%281%29.jpg
I really enjoyed building this model, hope you too!
The total print time was around 18 hours, in my case by file:
Building Base: 10 hs.
Building Top: 2 hs.
Light: 0.5 hs.
Door: 0.5 hs.
Fence: 1 hs.
Roof: 2.25 hs.
Platform: 1 hs.
Color switch can be added to the g-code file at the height you wish, in my model I used:
Building Base:
46.4
79.2
110.2
141.2
Building Top:
29.00
Some parts have guides to enable a better reference positioning; some to be glued & some to fit by pressure.
Hollow structure allows for a lamp placement and hopefully a rotating mechanism with a mirror.
Before assembly it´s a good idea to mark the parts so they fit perfectly. Although the design is symmetrical there are subtle differences in the width of the walls.
The two building parts are meant to be glued together.
As for the upper platform it can be removed. for lamp mechanism placement.
Added the light through an extravagant mechanism made for some spare components I had around. Needed this little touch :)
I don´t expect anyone to build it tough.
Used a motor scrapped from an old hard drive, a 3V 1W Led, a switch, LiPO battery, LiPO charger.
The author hasn't provided the model origin yet.