Gonggi game stones (Squid Game)

Hey, I coulndt find the real gonggi stones here, so I made them by myself. 

The main difference is, that these stones should be filled with something like sand so the center of gavity is lower and the stones can land easily on your hands. 

You can also hear the sound of the moving sand in the series btw.

PRINTING:

PLA
0,4 mm nozzle
0,15 mm layer height
20% infill
Organic supports only on printing plate.
I recommend using ironing and choose the random placing of seams.
DONT forget to swap colors if you have more filament colors.
DONT forget to add a stop before the model closes, so you can add something like sand (I recommend salt), (the model should be filled 70% salt).

Good luck and have fun :)