Creality Spider 2.0 Fan Cover-Noctua 40x20 x2

Creality Spider 2.0 Fan Cover-Noctua 40x20 x2

Required:

M3 inserts x8 M3 bolts 25mm x8 M3 bolt 10mm x2 (longer CR touch bolts required to allow the 6mm bracket) 40x20 Noctua fans x2

Ive recently upgraded my hot end to a creality Spider 2.0 (worthy Upgrade)

I had to cut bits out of my previous Noctua fan shroud to fit it over the new hot end ,

So ive redesigned it to fit, Ive since lost the LED section, Ive found they just dont like being that close to a hot bed, and Im now printing in plastics that require hotter settings, so ive give up on them altogether. and still dont need twin coolers so cleared the section completely

The shrouds been given a full over haul to better a few things air flow and ducting have included a couple of spacer required between the cr touch and fan cover to mount.

printed in CF PETG 237'c 80'c 50mm .5 nozzle 7.5 hrs

support touch build plate only and block the outer edges of the cover they dont need it will post some pics soon