Stl-Files (without configuration)
3mf-Files (with configuration) for MK3S and Mini (with and without colorchange)
Printfiles (G-Code) for MK3S and Mini (with and without colorchange)
Simply insert the standard refill (106.8mm long) from above and turn the locking screw into the thread (PDF Photos 1-9). The refill fits in the front with little to no space and if the tip is not visible the first time you insert it, simply move the tip in and out in the front opening a few times (PDF Foto 5) and then try again. When using a longer or shorter refill with the same "wings", the custom screw can be used and shortened to the desired length (height) in the slicer.
assembly see also: PDF-File (assembly photos)
These refills can be used for example:
Of course, the pen can also be printed with a different infill, as shown in the photos (if suitable) or completely closed (smooth). The beginning and end of the infill can also be changed.
The lower part of the pen and the screw (0-16mm) should be printed with 0.10mm because of the thread and the rest can be printed with 0.2mm (Prusaslicer: height range modifier).
The pen holder is available in 2 versions: round and polygon
Have Fun !
Stl-Dateien (ohne Konfiguration)
3mf-Dateien (mit Konfiguration) für MK3S und Mini (mit und ohne Farbwechsel)
Druckdateien (G-Code) für MK3S und Mini (mit und ohne Farbwechsel)
Einfach die Standard Mine (106,8mm lang) von oben einschieben und die Sicherungsschraube in das Gewinde drehen (PDF Fotos 1-9). Die Mine passt vorne mit wenig bis gar keinem Spiel und sollte die Spitze nicht gleich beim ersten Einschieben zu sehen sein dann einfach kurz die Spitze verkehrt ein paar mal in der vordere Öffnung ein und aus bewegen (PDF Foto 5) und dann nochmal versuchen. Bei Verwendung einer längeren oder kürzeren Mine mit selben “Flügeln” kann die “Custom Screw” verwendet werden und im Slicer auf die gewünschte Länge (Höhe) gekürzt werden.
Zusammenbau siehe auch: PDF-File (Zusammenbau Fotos)
Diese Minen können beispielsweise verwendet werden:
Der Stift kann natürlich auch wie auf den Fotos mit anderem Infill (falls geeignet) oder auch komplett geschlossen (glatt) gedruckt werden. Auch der Anfang und Ende des Infills kann verändert werden.
Der untere Teil des Kugelschreibers und der Schraube (0-16mm) sollte wegen dem Gewinde mit 0,10mm gedruckt werden und der Rest kann mit 0,2mm gedruckt werden (Prusaslicer: Höhenbereich Modifizierer).
Der Kugelschreiber-Halter ist in 2 Versionen verfügbar: Rund und Polygon
Viel Spaß !
The author hasn't provided the model origin yet.