Quill - ink dipping (both parts printed)

This quil is designed in Fusion 360 and printed on Průša mini+. 

The quil is printed in 2 parts that can be assembled together. First part, the Quil Nib is a bit tricky and it must be printed with layer height of 0,05mm. It took me less than 3 hours anyway. The second part, the feather, is easy you have to place it on the heat bed nicely. I have0standard 0,4 nozzle. Also print with detection of thin walls.

I would very much like to see some pictures of the quil with some nice notes. Therefore any comments with photos of your prints are very welcome. 

You can write notes on the paper while testing and share just the foto ;)  

Thank you!