Toy colander / strainer / pasta sieve / bowl / egg basket (no supports)

A colander ("pasta sieve") with 360 holes and two handles, printable without supports.

Intended use is as toy only, I don't recommend using it for actual food for hygienic reasons (see https://help.prusa3d.com/article/food-safe-fdm-printing_112313 on that topic).

Print in PETG for outdoor use.

Diameter is 180 mm, so it will just fit the Prusa MINI.

The model is designed to be printable without supports (max. overhang angle 60°).
My MINI had some troubles with that when trying to print in 0.3 mm layer height, so I strongly suggest to print in 0.2 mm layer height.