Fujifilm XF 27mm Squarehood
Simple squarehood for the XF 27mm 2.8 Lens
18
185
4
783
updated
April 11, 2025
Description
PDFThis square lens hood for the XF 27mm f/2.8 lens is designed for two-part printing. Print the threaded base and the hood separately. Screw the threaded base into the hood to your preferred depth and secure it with glue. Leave about 2mm of the thread for mounting to the lens.
Do not use glue on the lens!!
Recommended print settings: 0.4mm nozzle, 0.12mm layer height.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Redesigned with threads to screw on the lens.