Voron 2.4 and Trident MGN12C X Carriage Frame 20mm X 15mm

This part is simply the Voron Trident or 2.4R2 X carriage left and right frame with holes moved towards the center by 2.5mm each.   This was a particularly difficult model to modify.  Voron models are complex and very detailed.  I tried to follow the design intent of it's wire routing and make it look nearly identical. 

STEP, STL and an already scaled for ABS 3MF file is included.  The STL files are not scaled for printing like Voron STLs are, so beware! 

Why did I use an MGN12C instead of the recommended MGN12H?  I have a handful of high quality Japanese rails I purchased many years ago on eBay, so it was just matter of frugality. It might move faster, but honestly it's plenty fast on the dual 9mm rails, so this was not a concern!  

I hope this helps someone, build their Voron! 

The MGN12H hole pattern of 20mm X 20mm was changed to the MGN12C hole pattern of 20mm X 15mm