Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your refrigerator compartment yourself and you won't have any annoying smells.
In the following picture you can see the measurements. I think this should help to see if the spacer will fit in your fridge.
The fridges could be diffrent. Constructing a spacer for every fridge is very time-consuming and, thanks to the slicer, not necessary. You can adjust the size directly in the slicer with the scaling tool.
In principle, you do not need any support for printing. Simply place the top area
as in the picture above on the hotplate.
Filament: PLA is sufficient for this print. If the requirements for stability are higher, you can of course also use other materials such as PETG or PC-CF
Layer thickness / mode: 0,2mm
Infill: 20% for stability 50-100%
I wish you a happy print and I am happy about your experiences!
Greetings LPS
The author hasn't provided the model origin yet.