EU "AMX" 7 (Glue Free Mode)

In the world where the “AMX” tanks of EU (Exaggerated Utilities), this is a heavily modified, to the point where you can barely even recognize it, AMX 6.7 by Japan,  being both cheaper and more reliable than the double 100mm gun counterpart. The tank (If were to be in real life) Would be fitted with a 120mm cannon, two, improved laser rangefinders, the addition of one machine gun, and in the world of the AMX series, being a cheaper and slightly more reliable variant of the 6.7.

----------------------------------------------------------------------------------------------------------------

                                                           More about this project

-3D model finished in 3 days time! 

      With large 12-16 hour breaks in-between, this 3D model tank was made in a few days time, if I personally had to guess, starting with about two hours on day one and progressively getting shorter (Time wise) every consecutive day.

-No glue! 

     This model is aimed to not need glue, which is a big hinderance to those who don't have superglue. One of the biggest things I personally noticed in recent times about my models are their downloads. My biggest examples being the Valkyrie and the HSTV-L (Which I'm still working on instructions for). Why these models? Well, the Valkyrie is a glue free model, meaning you don't need glue to assemble it, but the latter cant even exist without glue, and hence the 18.6 : 1 download ratio (18.6 for the Valkyrie) and so I aim with this model to be an improvement over my past attempts at making a tank, and making a tank where glue is not a necessity! 

-Vertical cannon drive!

     Unlike many other tanks in the 3D community, this is a tank with a working vertical gun drive, which is rather unique for it, or many other tank models.

-Size

     A nice quirk rather than feature is its size! The original model coming at just a total length (Without the gun) of 70mm, and with the gun and small thing-a-mabobs, a respective 86mm, so it will fit on any hobbyists desk!

-Dimensions

     The tank has some nice, small dimensions, as mentioned in the previous point, the tank is some 86mm, and 87mm at maximum, but what about width and height? Well, for width, the tanks max is 32mm, if your 3D printer is really good, then 31.8mm, the side skirts adding a 0.6mm (that's included in max width). As for height, 22mm is going to be generally most peoples height, unless your printing on a resin printer, else, its 21.88mm tall.

----------------------------------------------------------------------------------------------------------------

                                                                      Assembly: