Make your own sign! With just some creativity, some super glue and some rope, the possibilities are endless!
Can be made to be hung or stuck in the ground with garden stakes (files provided)
The hole for the rope is 10mm
FRONT PLATE IS 5MM DEEP, CAN MOVE THE PEGS IN THE FUTURE IF REQUESTED SO YOU CAN USE THE COLOUR OF THE BACK PLATE AS THE TEXT/IMAGE COLOUR
I painted the back plate on the example to better increase the contrast of the letters!
Printed on an Ender 3 V3 SE in PLA
However, I would recommend using PTEG to hold up outside a little better
The author marked this model as their own original creation.
