East San Jose Carnegie Branch Library Kitcard

I designed a kitcard of the historical East S.J. Carnegie Library! This model was designed to be as simple and compact as possible, whilst also retaining the iconic features that makes our library so recognizable. Simply punch out the pieces from the runners (or just print out the loose parts) and assemble!

Different printers have different tolerants depending on their tuning which affects how the runners adhere to the pieces! Print the one that works better for your printer. Additionally, each piece is stamped with a number on the side that will be on the inside of the model. These numbers show the order of assembly! Follow the instructions below. 

BUILD INSTRUCTIONS: 

1. Assemble Pieces 1 and 2.
   
2. Add Piece 3. Make sure the slits on the side of the pieces with the numbers stamped are facing the inside of the model.
   
3. Slide piece 4 into the slit.
   
4. Close the model off with piece 5.