Test tube label clip (customizable)

Essentials

Designed for school labs where you'd use the same labels every year. Stick your label to this clip instead of the tube. Then snap this clip onto the test tube. No glue, no mark.

Ready-made 3MF models for  15~18mm test tube and 24~26mm boiling tubes. Tube diameter outside this range requires customization with OpenSCAD.

Material: PETG is highly recommended for its elasticity

WARNING: Requires excellent 1st layer adhesion and minimal stringing.

Print settings: 0.2mm SPEED

Infill: 100%

Customization

• Tube diameter
• Label plate size and thickness
• Clip size and thickness
• (Code is simple so you can tweak as you wish)