LED Replacement for LS Fanmod (Neptune 4 series)
Sooner or later the stock Extruder LEDs can burn out and get dimm. This bracket will allow the use of standart component
9
27
1
266
updated
April 9, 2025
Description
PDFThis bracket is compatible with LS Fanmod in all varaints. Its using a standart 5mm LED bulb as a replacement for the stock led pcb. a single 5mm LED is bright enough to light everything around the nozzle.
What you need (BOM)
- 24V 5mm LED(white)
- 1x JST-zh 1.5 male connector
- Soldering or crimping equipment
Install
The LED will just firmly slide into the bracket. You can secure it additionally with a small drop of glue. You will need to solder or crimp the jst-zh connector on. You require ~120mm of cablelength. From here its just a matter of replacing the led+bracket thats on your LSFanmod with the one here.
Version log
v05 - initial release
-----
Feel free to buymeacoffee.com/lamarc
Tags
Model origin
The author marked this model as their own original creation.
